This exhaust manifold fits the R53 Cooper, Cooper S or the One with the 1.6L engine.

4 into 1 design for optimum street performance. Estimated power gains from 10 – 30 BHP depending on other supporting mods. The whole manifold has been TIG welded for strength and durability.

Key features

• Vehicle-specific fitment: MINI One/Cooper (R50) — 01-06
• Straight-through replacement section
• Stainless Steel construction · TIG-welded joints
• Fitting kit included

Design features

New for 2020 we have updated the design to make fitment easier and with a stronger flexi. Any warranty claim made for a failed flexi joint MUST HAVE photographic evidence of the ARB being removed during installation. On rare occasions we have found some engines have the 2 bolts in the centre of the head flange in slightly different locations.

Fitment notes

If the ARB is not removed during fitting, it increases the chance of the flexible joint failing.

Important: IMPORTANT FITTING NOTE: When. Fitting this manifold you will need to move the ARB out of the way to gain the clearance required. If you have one of these cars these holes will need to be elongated to allow fitment of the manifold.

This manifold will remove the catalytic converter and therefore is sold for trackday and off road use only. Comes with the gaskets and everything you can see in the pictures. This seems to effect less than 1% of cars.

What’s in the box?

• 1 × Tubular Exhaust Manifold
• 1 × Decat Section
• 1 × Gasket Set